Catalog
Guided Surgery
The implant is installed with a virtual planning using guides.
Browse content 
Main features
- 04 offsets 07, 09, 11 and 13 mm for different clinical situations;
- Floating stop drill in different offsets and drill lengths;
- Short drills for small mouth opening spaces;
- Pilot to eliminate interference in an inclined bone plane;
- The universal kit installs different implant systems;
- Assemblers are floating in offsets 07, 09, 11 and 13 mm;
- Long assembler without stop and floating in the ratchet wrench;
- Short assembler for small spaces;
- Open washer 4.0, for use in smaller mouth opening;
- 3.0 mm slim washer for reduced space of the lower and upper lateral incisors;
- Drill extender (extender) to be used in case of interference from the contra angle head;
- Less amount of drills;
- Color coding on drills and stop drills.
- Safety
- We eliminate the gap and lever arm caused by the Drill Guides;
- Pilot to eliminate deviations from inclined bone planes.
Planning in differents Offsets
The planning of the position of the Washer in the surgical guide can be performed at different heights of Offsets. The Washer can be positioned in Offset 07 mm, Offset 09 mm, Offset 11 mm and Offset 13 mm. Such variations of Offsets are determined during planning according to the thickness of the mucosa.
- Offset is the distance between the Implant platform and the upper margin of the Washer;
- Offset is a drill compensation in guided surgery;
- It is the zero point that begins to count the length of the implant.
Drill Sequence and Measures
The Drills have lengths of 07, 09, 11 and 13 mm and Pilots are Drills used to start drilling and regularize the irregular bone crest.
Drill Ø 2.8x7mm
Drill Ø 3.0x7mm
Drill Ø 3.3x7mm
Drill Ø 2.8x9mm
Drill Ø 3.0x9mm
Drill Ø 3.3x9mm
Drill Ø 2.8x11mm
Drill Ø 3.0x11mm
Drill Ø 3.3x11mm
Drill Ø 2.8x13mm
Drill Ø 3.0x13mm
Drill Ø 3.3x13mm
Drill Ø 2.8x13mm
Drill Ø 3.0x13mm
Drill Ø 3.3x13mm
Drill Ø 2.6x13mm
Pilot Drill Ø 3.0mm
Pilot Drill Ø 4.0mm
Washer
The washer is made of titanium, which inserted in the Surgical Guide, directs both the milling and the installation of the implant. The Stopdrill has the function of adjusting the length of the Drill, according to the length of the Offset or the planned implant.
Slim Washer Ø 3.0mm
Regular Ø 4.0mm
Open washer Ø 4.0mm
Extended Washer
Stop Drill 2.0
Stop Drill 4.0
Stop Drill 6.0
Instruments
Conca CM
Conca NM
Conca HIN
Monta CM short
Monta CM long
Monta NM short
Monta NM long
Monta HIN short
Monta HIN long
Monta CM slim
Drill Ø 13mm
Fixer
Punch
Drill Extender
Torque wrench ratchet
Digital key 1.2 mm long
Stop Drill Ruler
Differentials
Instructions for Use
The smallest drills and instruments that allow access in posterior regions, only the Smart Guided Kit has!
Ensure safety and predictability for you and your patients.
No pain or bleeding
Only with the Smart Guided Kit is it possible to provide your patient with this comfort when installing the implants.
Developed especially to facilitate understanding from the planning of the Smart Guided digital flow to the handling of instruments when installing guided dental implants.
WHERE TO BUYRelated products
Cone Morse Screw Platinum
The Cone Morse Screw Platinum Line has an 11.5º tapered internal connection and switching platform. Its external design features double conicity with double trapezoidal thread for faster installation. Its external design associated with the active tip facilitates the insertion in different bone qualities in the maxilla and mandible.
More information
Cone Morse Screw Slim 3.0
The Cone Morse Screw Slim 3.0 implant was developed to be used in the lower incisors or in small spaces. Enjoy the benefits of the smaller diameter Cone Morse Screw system. It has high precision, mechanical resistance and simplicity.
More information
Select your language 