Catalog
Switch Platform
A new concept that decreases bone loss and favors primary Implant stability in the patient.
Browse content 
Key Features
Suitable for all bone types and made of Grade IV Titanium, the Cone Morse Screw Platinum is the best choice for a long-lasting, quick-fit Implant.
Differentials
Biological Chamfer
Ensures better adaptation of the Implant to the patient’s gum.
Speed Surface
Since 2018 all Implants produced by Kopp have had the treatment of Speedsurface. Developed by Kopp, it turned out to be one of the best solutions for optimizing bone integration.
FIND OUT MORE!Drill Sequence and Measurements
The diameter of the Drill may change depending on the operator's clinical experience.
| Ø3.5 | Ø3.75 | Ø4.0 | Ø4.3 | Ø5.0 | |
|---|---|---|---|---|---|
| Lança |  |
|
|
|
|
| 2.0 | |
|
|
|
|
| 2.8 | |
|
|
|
|
| 3.0 | |
|
|
|
|
| 3.3 | |
|
|
|
|
| 3.8 | |
|
|||
| 4.3 | |
| 7.0mm | 8.0mm | 9.0mm | 11,0 mm | 13,0 mm | 15,0 mm | |
|---|---|---|---|---|---|---|
| ø3.5 | 140.714 | 140.715 | 140.716 | 140.717 | 140.718 | 140.719 |
| ø3.75 | 140.720 | 140.721 | 140.722 | 140.723 | 140.724 | 140.725 |
| ø4.0 | 140.726 | 140.727 | 140.728 | 140.729 | 140.730 | 140.731 |
| ø4.3 | 140.732 | 140.733 | 140.734 | 140.735 | 140.736 | 140.737 |
| ø5.0 | 140.738 | 140.739 | 140.740 | 140.741 | 140.742 | 140.743 |
Prosthetic Options
General Prosthetic Options:
Cover
Made of Polymer or Titanium the Cover has the function of closing and protecting the entrance of the Cone Morse Implant during the bone integration phase.
Healing
Manufactured in Titanium according to ASTM F 136 standard, the scar is used for gingival profile formation during the healing phase for subsequent assembly of the prosthetic components. It has different transmucosal heights (2.0mm, 4.0mm, 6.0mm and 8.0mm) and two diameters (3.5mm and 4.5mm).
Analog
It is used as a replica of the Cone Morse Implant platform in a plaster model for prosthesis confection and prosthetic planning. It is made of brass or stainless steel.
Repositional Transfer
It is used to transfer the position and direction of the implant through impression. Used in CLOSED tray. Manufactured with Titanium according to ASTM F 136 standard the Transfer is anti-rotational. After molding the CM transfer is screwed into the CM analog and repositioned in the molding.
Drag Transfer
Made of titanium according to ASTM F136 Standard, the Drag Transfer is used to transfer the position and direction of the implant through impression. Used in OPEN tray. After molding the CM transfer is loaded next to the impression material and then screwed into the CM analog.
Specific Prosthetic Options
- Cemented Single Prosthesis
- Single Screw Prosthesis
- Cemented Multiple Prosthesis 02 03 Elements
- Screwed Multiple Prosthesis
- Overdenture
CM Screw Titanium Trunnion
Straight or Angled (17 ° and 30 °) Made of titanium according to ASTM F 136 standard the Trunnion is used to rehabilitate cemented Cone Morse unit prosthesis. It is available in various transmucosal heights and diameters.
Ucla CM Screw Calcinable Antirrotational (Titanium)
Low strap and high strap. It is used to rehabilitate screwed unitary prosthesis or Cone Morse cemented multiple fixed prosthesis. It can be customizable through wear.
Ucla CM Screw Calcinable Antirrotational (Cobalt Chrome Base)
Low strap and high strap. It is used to rehabilitate screwed unitary prosthesis or Cone Morse cemented multiple fixed prosthesis. It can be customizable through closure and casting in prosthetic alloys.
Mini R CM Screw Abutment (Titanium)
It is an intermediate prosthetic component to rehabilitate single or multiple prosthesis screwed onto 11.5 ° Cone Morse implant. Made of titanium alloy according to ASTM F 136, it has different transmucosal heights (0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, and 5.0mm).
UCLA CM Calcinable Antirrotational (Titanium)
Low strap and high strap. It is used to rehabilitate screwed unitary prosthesis or Cone Morse cemented multiple fixed prosthesis. It can be customizable through wear.
CM Screw Mini Abutment (Titanium)
Straight or Angled (17 ° and 30 °) Made of titanium according to ASTM F 136, the Mini Abutment is used to rehabilitate multiple fixed screwed morse cone prosthesis. It also features different transmucosal heights (0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, and 5.0mm 6.0mm).
Mini R CM Screw Abutment (Titanium)
It is an intermediate prosthetic component to rehabilitate single or multiple prosthesis screwed onto 11.5 ° Cone Morse implant. Made of titanium alloy according to ASTM F 136, it has different transmucosal heights (0.5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, and 5.0mm).
Attachment Ball
It is used for retention and stability of removable overdenture prosthesis. Made of titanium according to ASTM F 136 standard, it features prosthetic O’Ring ring platform. Available in different transmucosal heights (1.0mm, 2.0mm, 3.0mm, 4.0mm)
O'Ring
Used in the removable prosthesis, it has a titanium cocoon made according to ASTM F 136 and an O’Ring * ring inside with nitrile rubber material. * O’Ring ring is sold separately for replacement.
Related Products
Here you will find instruments and kits that are compatible with the Cone Morse Screw Implant System.
Surgical Kit
The Surgical Kit features a compact and modern design for the analog installation of Cone Morse Screw dental implants and External Hexagon HEXA. In addition, the Kit offers all the necessary instruments for the placement of the Tapas Polymer and titanium implants.
More information
Prosthetic Selection Kit
This kit helps to select transmucosal height and angulation of prosthetic components, with instruments that have a long service life and durability.
More information
Select your language 