Catalog
Conical Body
It develops a better distribution in the masticatory load to the bone.
Browse content 
Main features
The Cone Morse Screw Slim 3.0 implant was developed to be used on the lower incisors or in small spaces. Enjoy the benefits of the smaller diameter Cone Morse Screw system. It has high precision, mechanical resistance and simplicity.
Technical characteristics
- 11.5º CM internal connection
- Conical body
- Active tip
- Trapezoidal thread
- Ti grade material 04
- Speed Surface
- All Bone Types
Biological Chamfer
Ensures better adaptation of the implant to the patient’s gums.
Speed Surface
Since 2018, all implants produced by Kopp have been treated with Speed Surface. Developed by Kopp, it turned out to be one of the best solutions to optimize osseointegration.
FIND OUT MORE!Drill sequence and measurements
The drill diameter can be changed depending on the operator's clinical experience.
| Ø3.0 | Ø3.5 | Ø3.75 | Ø4.0 | Ø4.3 | Ø5.0 | |
|---|---|---|---|---|---|---|
| Spear |  |
|
|
|
|
|
| 2.0 | |
|
|
|
|
|
| 2.8 | |
|
|
|
|
|
| 3.0 | |
|
|
|
|
|
| 3.3 | |
|
|
|
||
| 3.8 | |
|
||||
| 4.3 | |
| Medullary Bone | Cortical Bone |
|---|---|
| Drill 2.0 | Drill 2.0 / Drill 2.8 |
Prosthetic Options
General Prosthetic Options
Cover
Made of Polymer or Titanium, the Cover has the function of closing and protecting the entrance of the implant Cone Morse during an osseointegration phase.
Healer
Made of Titanium according to ASTM F 136, the Healer is used to form the gingival profile during the healing phase for subsequent assembly of the prosthetic components. It has different transmucosal heights (2.0 mm, 4.0 mm, 6.0 mm and 8.0 mm) and two diameters (3.5 mm and 4.5 mm).
Analog
It is used as a replica of the Cone Morse implant platform in a plaster model for prosthesis construction and prosthetic planning. It is made of brass or stainless steel.
Repository Transfer
It is used to transfer the position and direction of the implant through molding. Used in CLOSED tray. Made with Titanium according to ASTM F 136, the Transfer is anti-rotation. After molding, the CM transfer is screwed into the CM analog and repositioned in the molding.
Drag Transfer
Made of titanium according to ASTM F136, the Drag Transfer is used to transfer the position and direction of the implant through molding. Used in OPEN tray. After molding, the CM transfer is loaded with the molding material and after screwed into the CM analog
Specific prosthetic options
- Cemented Single Prosthesis
- Screw Unitary Prosthesis
- Cemented Multiple Prosthesis 02-03 Elements
- Multiple Screw Prosthesis
- Overdenture
CM Screw Titanium Trunnion
Straight or Angled (17 ° and 30 °) Made of titanium according to ASTM F 136 standard, the trunnion is used to rehabilitate cemented unit prosthesis Morse taper. It is available in different transmucosal heights and diameters.
Ucla CM Screw Castable Anti-rotation (Cobalt Chrome Base)
Low brace and high brace. It is used to rehabilitate single screw prosthesis or multiple fixed prosthesis cemented Cone Morse. It can be customizable through closure and casting in prosthetic alloys.
Ucla CM Screw Castable Anti-rotation (Titanium)
Low brace and high brace. It is used to rehabilitate single screw prosthesis or multiple fixed prosthesis cemented Cone Morse. Can be customizable through wear.
Mini CM R Pillar Screw (Titanium)
It is an intermediate prosthetic component to rehabilitate single or multiple prosthesis screwed on 11.5 ° Cone Morse implant. Made of titanium alloy according to ASTM F 136, it has different transmucosal heights (0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm).
UCLA CM Castable Anti-rotation (Titanium)
Low brace and high brace. It is used to rehabilitate single screw prosthesis or multiple fixed prosthesis cemented Cone Morse. Can be customizable through wear.
CM Screw Mini Abutment (Titanium)
Straight or Angled (17 ° and 30 °) Made of titanium according to ASTM F 136, the Mini Abutment is used to rehabilitate multiple fixed prosthesis screwed in Cone Morse. It also features different transmucosal heights (0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm 6.0 mm).
Mini CM R Pillar Screw (Titanium)
It is an intermediate prosthetic component to rehabilitate single or multiple prosthesis screwed on 11.5 ° Cone Morse implant. Made of titanium alloy according to ASTM F 136, it has different transmucosal heights (0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm).
Ball Attachment
It is used for retention and stability of removable overdenture prosthesis. Made of titanium according to ASTM F 136, it has a prosthetic platform for O’Ring ring. Available in different transmucosal heights (1.0 mm, 2.0 mm, 3.0 mm, 4.0 mm)
O'Ring
Used in the removable prosthesis, it has a cocoon made of titanium according to the ASTM F 136 standard and O’Ring * ring in its interior in nitrile rubber material. * O’Ring ring is sold separately for replacement.
Related products
Surgical Kit
The Surgical Kit features a compact and modern design for the analog installation of Cone Morse Screw dental implants and External Hexagon HEXA. In addition, the Kit offers all the necessary instruments for the placement of the Tapas Polymer and titanium implants.
More information
Prosthetic Selection Kit
This kit helps to select transmucosal height and angulation of prosthetic components, with instruments that have a long service life and durability.
More information
Select your language 